P14 PWM PST A-RGB
140 mm A-RGB PWM Fan with Cable Splitter | Single Fan
Addressable RGB for Full Color Control
The P14 PWM PST A-RGB features 12 digital A-RGB LEDs in the fan's middle wheel. These are independently controlled and compatible with common A-RGB standards from leading motherboard manufacturers. This way, the fan can be fully illuminated directly via the motherboard A-RGB connector or through an external controller and synchronized with other components' lighting.
0 dB Mode — Zero rpm
The fan speed can be throttled down to a standstill via PWM. This allows for silent operation in idle and at the same time guarantees maximum performance when needed.
Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely noticeable, even at low speeds. In addition, the P14 PWM PST A-RGB features rubber contact surfaces, minimizing audible vibrations.
Optimized for High Static Pressure
The P14 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance, making it suitable for use on heatsinks, radiators, and filters.
200 to 1900 rpm Controlled via PWM PST
Thanks to a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled simultaneously with all other fans. This minimizes noise while guaranteeing optimal cooling performance.
High-Quality Bearing
Thanks to an alloy and lubricant combination developed in Germany, friction within the bearing is reduced, achieving higher efficiency. This generates less heat, reduces bearing noise, and extends the service life of the fan.
Specifications
- Fan speed: 200—1900 rpm controlled by PWM (0 rpm below 5% PWM)
- Airflow: 68.90 cfm | 117.06 m³/h
- Static pressure: 2 mmH2O
- Noise level: 0.3 sone
- Fan frame: Standard
- Control type: Pulse Width Modulation (PWM) PST
- Connector: 4-pin connector + 4-pin socket
- Fan bearing: Fluid Dynamic Bearing
- Operating ambient temperature: 0—40 °C
- Typical voltage: 12 V DC
- Start-up voltage: 5 volts
- Current | Voltage: 0.17 A | 12 V DC
- Cable length: 400 millimeters
- LED: 12 A-RGB LEDs
- Connector: 3-pin 5 V-DI-GND connector
- Current / Voltage: 0.4 A/5 V
- Cable: 400 mm cable with 80 mm shared cable, black
- Length: 140 millimeters
- Width: 140 millimeters
- Height: 27 millimeters
- Weight: 225 grams
ARCTIC FAN P14 PWM PST A-RGB 14CM BLACK
€10.94
(VAT included)
P14 PWM PST A-RGB
140 mm A-RGB PWM Fan with Cable Splitter | Single Fan
Addressable RGB for Full Color Control
The P14 PWM PST A-RGB features 12 digital A-RGB LEDs in the fan's middle wheel. These are independently controlled and compatible with common A-RGB standards from leading motherboard manufacturers. This way, the fan can be fully illuminated directly via the motherboard A-RGB connector or through an external controller and synchronized with other components' lighting.
0 dB Mode — Zero rpm
The fan speed can be throttled down to a standstill via PWM. This allows for silent operation in idle and at the same time guarantees maximum performance when needed.
Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely noticeable, even at low speeds. In addition, the P14 PWM PST A-RGB features rubber contact surfaces, minimizing audible vibrations.
Optimized for High Static Pressure
The P14 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance, making it suitable for use on heatsinks, radiators, and filters.
200 to 1900 rpm Controlled via PWM PST
Thanks to a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled simultaneously with all other fans. This minimizes noise while guaranteeing optimal cooling performance.
High-Quality Bearing
Thanks to an alloy and lubricant combination developed in Germany, friction within the bearing is reduced, achieving higher efficiency. This generates less heat, reduces bearing noise, and extends the service life of the fan.
Specifications
- Fan speed: 200—1900 rpm controlled by PWM (0 rpm below 5% PWM)
- Airflow: 68.90 cfm | 117.06 m³/h
- Static pressure: 2 mmH2O
- Noise level: 0.3 sone
- Fan frame: Standard
- Control type: Pulse Width Modulation (PWM) PST
- Connector: 4-pin connector + 4-pin socket
- Fan bearing: Fluid Dynamic Bearing
- Operating ambient temperature: 0—40 °C
- Typical voltage: 12 V DC
- Start-up voltage: 5 volts
- Current | Voltage: 0.17 A | 12 V DC
- Cable length: 400 millimeters
- LED: 12 A-RGB LEDs
- Connector: 3-pin 5 V-DI-GND connector
- Current / Voltage: 0.4 A/5 V
- Cable: 400 mm cable with 80 mm shared cable, black
- Length: 140 millimeters
- Width: 140 millimeters
- Height: 27 millimeters
- Weight: 225 grams
ARCTIC FAN P14 PWM PST A-RGB 14CM BLACK
Information about the brand representative in the EU In accordance with Regulation (EU) 2023/988 of the European Parliament and of the Council of May 10, 2023, on general product safety (GPSR), we provide the data of the brand representative in the European Union:
ARCTIC GmbH .- Bei der Lohmühle 3 21465 Reinbek DE
Important: If you have any questions about your order, product, or warranty, please log in to your Aquí Mejor customer account. From there, select the corresponding order and contact the selling company (Aquí Mejor or the external seller) with whom you made the purchase.
1599780-9AW
Data sheet
- Color
- Black