Kingston ValueRAM 8GB 3200MHz DDR4
This ValueRAM memory module is a DDR4-3200 CL22 SDRAM component of 1G x 64-bit (8 GB), 1Rx16, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard DDR4-3200 latency of 22-22-22 at 1.2V, using gold contacts for an optimal connection.
Key Features
- Voltages: VDDQ = 1.2V typical, VPP = 2.5V typical, VDDSPD = 2.2V to 3.6V.
- Advanced Technology: Includes on-die termination (ODT) for data, strobe, and mask signals.
- Efficiency: Features Low-Power Auto Self Refresh (LPASR) and Data Bus Inversion (DBI).
- Performance: Integrated on-chip VREFDQ generation and calibration, single rank, and I2 Serial Presence Detect (SPD) EEPROM.
- Architecture: 8 internal banks; 2 groups of 4 banks each.
- Configuration: Fixed burst cut (BC) of 4 and burst length (BL) of 8 via the Mode Register Set (MRS). BC4 or BL8 selectable on-the-fly (OTF).
- Design: Fly-by topology, terminated address bus and control command.
- Dimensions and Compliance: PCB with 1.18” (30.00 mm) height, RoHS compliant and halogen-free.
Technical Specifications
- Memory: 8 GB capacity, DDR4 SDRAM type.
- Format: 260-pin SO-DIMM.
- Speed: 3200 MHz.
- Latency: CL22.
- Voltage: 1.2 V.
KINGSTON VALUERAM 8GB DDR4 3200MHZ SODIMM CL22 RAM MEMORY
€87.66
(VAT included)
Similar Products From Different Sellers
Kingston ValueRAM 8GB 3200MHz DDR4
This ValueRAM memory module is a DDR4-3200 CL22 SDRAM component of 1G x 64-bit (8 GB), 1Rx16, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard DDR4-3200 latency of 22-22-22 at 1.2V, using gold contacts for an optimal connection.
Key Features
- Voltages: VDDQ = 1.2V typical, VPP = 2.5V typical, VDDSPD = 2.2V to 3.6V.
- Advanced Technology: Includes on-die termination (ODT) for data, strobe, and mask signals.
- Efficiency: Features Low-Power Auto Self Refresh (LPASR) and Data Bus Inversion (DBI).
- Performance: Integrated on-chip VREFDQ generation and calibration, single rank, and I2 Serial Presence Detect (SPD) EEPROM.
- Architecture: 8 internal banks; 2 groups of 4 banks each.
- Configuration: Fixed burst cut (BC) of 4 and burst length (BL) of 8 via the Mode Register Set (MRS). BC4 or BL8 selectable on-the-fly (OTF).
- Design: Fly-by topology, terminated address bus and control command.
- Dimensions and Compliance: PCB with 1.18” (30.00 mm) height, RoHS compliant and halogen-free.
Technical Specifications
- Memory: 8 GB capacity, DDR4 SDRAM type.
- Format: 260-pin SO-DIMM.
- Speed: 3200 MHz.
- Latency: CL22.
- Voltage: 1.2 V.
1522552-321
Data sheet
- Color
- Green