Integrated VRM Fan
The PWM-controlled fan reduces the voltage regulator temperature, ensuring stable performance.
Offset Mounting for Intel and AMD
Shifts the cold plate to the CPU's hotspot for more efficient heat transfer.
Intel Contact Frame
Optimized contact pressure distribution for longer CPU lifespan and better heat dissipation.
Integrated Cable Management
Fan cables integrated into the sleeve simplify installation and minimize clutter.
New P12 Pro Fans
More performance at any speed: the P12 Pro unleash their full potential, offering quieter operation at low RPMs and greater performance reserves under load for uncompromising cooling.
Premium Class Radiator
The 38 mm radiator not only improves thermal dissipation but also contains more liquid than conventional 27 mm radiators. This reduces heat accumulation and ensures more efficient management of temperature spikes.
Premium Tubing
Reinforced EPDM tubes with braided sleeving for increased durability.
Easy Installation
Pre-installed and pre-wired fans, direct mounting, and animated online manual.
Includes MX-6 Thermal Paste
Apply in a cross pattern: the pump's cold plate distributes the paste evenly.
Two Control Options
With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
Check Your Case Compatibility
At least 63 mm of clearance is required for installation.
Limited Compatibility with Some Motherboards
Some boards may be incompatible with the Liquid Freezer III Pro due to large SSD heatsinks in the M.2_1 slot. For affected boards, a compatible M.2 heatsink is provided free of charge.
Specifications
- Performance and Warranty: 6-year warranty, MX-6 thermal compound (0.8 g), operating temperature 0-40 °C.
- Pump and Block: Pump 800-2800 rpm (PWM control), copper cold plate with micro-skived fins.
- Radiator and Tubing: Aluminum radiator 277 × 120 × 38 mm, 450 mm tubes, outer diameter 12.4 mm, inner 6.0 mm.
- Fans: 2x P12 Pro A-RGB (600-3000 rpm), airflow 77 cfm, static pressure 6.9 mmH2O, Fluid Dynamic Bearing.
- VRM Fan: 400-2500 rpm (PWM control), 12x A-RGB Gen2 LEDs.
- Connectivity and Weight: 4-Pin Fan and 3-Pin A-RGB connectors, total weight 1665 g.
ARCTIC LIQUID FREEZER III PRO 240 A-RGB COOLING SYSTEM - BLACK
€89.44
(VAT included)
Integrated VRM Fan
The PWM-controlled fan reduces the voltage regulator temperature, ensuring stable performance.
Offset Mounting for Intel and AMD
Shifts the cold plate to the CPU's hotspot for more efficient heat transfer.
Intel Contact Frame
Optimized contact pressure distribution for longer CPU lifespan and better heat dissipation.
Integrated Cable Management
Fan cables integrated into the sleeve simplify installation and minimize clutter.
New P12 Pro Fans
More performance at any speed: the P12 Pro unleash their full potential, offering quieter operation at low RPMs and greater performance reserves under load for uncompromising cooling.
Premium Class Radiator
The 38 mm radiator not only improves thermal dissipation but also contains more liquid than conventional 27 mm radiators. This reduces heat accumulation and ensures more efficient management of temperature spikes.
Premium Tubing
Reinforced EPDM tubes with braided sleeving for increased durability.
Easy Installation
Pre-installed and pre-wired fans, direct mounting, and animated online manual.
Includes MX-6 Thermal Paste
Apply in a cross pattern: the pump's cold plate distributes the paste evenly.
Two Control Options
With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
Check Your Case Compatibility
At least 63 mm of clearance is required for installation.
Limited Compatibility with Some Motherboards
Some boards may be incompatible with the Liquid Freezer III Pro due to large SSD heatsinks in the M.2_1 slot. For affected boards, a compatible M.2 heatsink is provided free of charge.
Specifications
- Performance and Warranty: 6-year warranty, MX-6 thermal compound (0.8 g), operating temperature 0-40 °C.
- Pump and Block: Pump 800-2800 rpm (PWM control), copper cold plate with micro-skived fins.
- Radiator and Tubing: Aluminum radiator 277 × 120 × 38 mm, 450 mm tubes, outer diameter 12.4 mm, inner 6.0 mm.
- Fans: 2x P12 Pro A-RGB (600-3000 rpm), airflow 77 cfm, static pressure 6.9 mmH2O, Fluid Dynamic Bearing.
- VRM Fan: 400-2500 rpm (PWM control), 12x A-RGB Gen2 LEDs.
- Connectivity and Weight: 4-Pin Fan and 3-Pin A-RGB connectors, total weight 1665 g.
ARCTIC LIQUID FREEZER III PRO 240 A-RGB COOLING SYSTEM - BLACK
Information about the brand representative in the EU In accordance with Regulation (EU) 2023/988 of the European Parliament and of the Council of May 10, 2023, on general product safety (GPSR), we provide the data of the brand representative in the European Union:
ARCTIC GmbH .- Bei der Lohmühle 3 21465 Reinbek DE
Important: If you have any questions about your order, product, or warranty, please log in to your Aquí Mejor customer account. From there, select the corresponding order and contact the selling company (Aquí Mejor or the external seller) with whom you made the purchase.
1523155-7W8
Data sheet
- Color
- Black